Meccano Set Parts Lists
MECCANO SET
19903 - Robotics (Set 10) (2019-)
Parts Lists
Compiled by Timothy Edwards
Note 1 - Where available photos of the parts in the correct colours appear in the left hand column. Where these are not available, but photos of the same part in different colours are available these appear in the right hand column.
Note 2 - The photos will increase in size if you hover your mouse cursor over them.
If anyone can supply missing photos of parts, please get in touch with me.
Thanks to Oscar Felgueiras for many of the part photos.
Set No. 19903 - Robotics (Set 10) (2019-) (Innovation) |
|||||||
---|---|---|---|---|---|---|---|
Photo | Old P/N | New P/N | Colour/Finish | Material | Part Name | Quantity | Alternative Photo |
2 | A202 | zinc (French) | plated steel | Perforated Strips, 5 1/2" | 2 | 3 | A203 | zinc (French) | plated steel | Perforated Strips, 3 1/2" | 14 | 5 | A105 | zinc (French) | plated steel | Perforated Strips, 2 1/2" | 2 | 6 | B146 | zinc (French) | plated steel | Perforated Strips, 2" | 2 | 9f | A109 | zinc (French) | plated steel | Angle Girder, 1 1/2" | 2 | 9l | A309 | zinc (French) | plated steel | Angle Girder, 1" | 4 | 12 | A012 | zinc (French) | plated steel | Angle Bracket, 1/2" x 1/2" | 14 | 12a | A612 | zinc (French) | plated steel | Angle Bracket, 1" x 1" | 2 | 12b | A512 | zinc (French) | plated steel | Angle Bracket, 1" x 1/2" | 7 | 12c | A712 | zinc (French) | plated steel | Obtuse Angle Bracket 1/2" x 1/2" | 11 | 12d | A713 | zinc (French) | plated steel | Obtuse Angle Bracket 1" x 1/2" | 8 | 22bp | A626 | blue (French) | plastic | Pulley, 25 mm diam. without boss | 4 | 22b3p | A627 | green light (French) | plastic | Pulley, 25 mm diam. triangular hole | 8 | 23bp | A524 | green light (French) | plastic | Pulley, 13 mm diam. without boss | 4 | 23c3p | A623 | black (French) | rubber | Rubber pulley, 8.5 mm d., for triang. shafts | 36 | 25b3p | A025 | green light (French) | plastic | Pinion, 9mm diam., triang. hole, 12 teeth | 2 | 25d3p | A631 | green light (French) | plastic | Pinion, 19mm diam., triang. hole, 24 teeth | 2 | 26p3p | A326 | green light (French) | plastic | Pinion, 12 mm d., 6 mm face, 19 t, triang. h | 13 | 27a3p | A327 | green light (French) | plastic | Gear Wheel, 38 mm d., 57 t., triang. hole | 8 | 28p3p | A128 | green light (French) | plastic | Cont. Wheel, 36 mm d., 50 t, triang. hole | 2 | 37a | A337 | zinc (French) | plated steel | Nut, square | 467 | 37b(3) | A637 | zinc (French) | plated steel | Bolt, 5.8 mm (15/64"), hex. socket head | 114 | 37h(1) | A737 | zinc (French) | plated steel | Lock Nut, square | 203 | 38 | A138 | zinc (French) | plated steel | Washer | 89 | 38a | A238 | blue (French) | plastic | Plastic Washer, 6.4 mm thickness | 95 | 38b | A338 | green light (French) | plastic | Plastic Washer, 5 mm thickness | 38 | 38d | A538 | zinc (French) | plated steel | Washer, 19 mm diam. | 10 | 40d | A504 | black (French) | non descript (other) | Hank of Cord, short (50 cm) | 1 | 48 | A248 | zinc (French) | plated steel | Double Angle Strip, 1 1/2" x 1/2" | 1 | 48a | A448 | zinc (French) | plated steel | Double Angle Strip, 2 1/2" x 1/2" | 4 | 48e | A548 | zinc (French) | plated steel | Double Angle Strip, 1" x 1/2" | 2 | 57b | A195 | black (French) | die cast | Hook | 1 | 59c | A259 | white (French) | plastic | Plastic Grip, for triangular shafts | 46 | 74 | A174 | zinc (French) | plated steel | Flat Plate, 1 1/2" x 1 1/2" | 5 | 77 | A277 | zinc (French) | plated steel | Triangular Plate, 1" | 2 | 103g | A305 | zinc (French) | plated steel | Flat Girder, 2" | 4 | 103l | A503 | zinc (French) | plated steel | Flat Girder, 1" | 2 | 110c | A334 | green light (French) | plastic | Rack Strip, Plastic | 2 | 111(3) | A911 | black (French) | chemically blackened steel | Bolt, 19 mm (3/4"), hex. socket head, black | 32 | 111a(3) | A411 | zinc (French) | plated steel | Bolt, 12 mm (1/2"), hex. socket head | 296 | 111c(3) | A511 | black (French) | chemically blackened steel | Bolt, 9.5 mm (3/8"), hex. socket head, black | 382 | 111d(3) | A611 | black (French) | chemically blackened steel | Bolt, 32 mm (1 1/8"), hex. socket head, black | 6 | 111e | A912 | zinc (French) | plated steel | Bolt, 25 mm (1"), hex. socket head | 2 | 120c | A353 | spring steel | Compression Spring, 19.5 mm long | 4 | 126a | A127 | zinc (French) | plated steel | Flat Trunnion | 4 | 133 | A366 | zinc (French) | plated steel | Corner Bracket, 1 1/2" | 2 | 133a | A133 | zinc (French) | plated steel | Corner Bracket, 1 " | 4 | 133b | A367 | zinc (French) | plated steel | Corner Bracket, 1 " x 1 1/2" | 12 | 133c | A233 | zinc (French) | plated steel | Obtuse Corner Bracket, 1 " x 1 1/2" | 8 | 142f | A381 | black (French) | rubber | Tractor Tyre diam. 25 mm, ext. 36 mm | 8 | 142g | A382 | black (French) | rubber | Tractor Tyre diam. 12 mm, ext. 28 mm | 4 | 144c | A444 | green light (French) | plastic | Driving Dog Triangular Hole | 10 | 147d | A247 | black (French) | chemically blackened steel | Pivot Bolt, 15 mm (37/64"), hex socket head, black | 55 | 147f | A447 | zinc (French) | plated steel | Pivot Bolt, 19 mm (3/4"), hex socket head | 60 | 147g | A347 | black (French) | chemically blackened steel | Pivot Bolt, 23 mm (29/32"), hex socket head, black | 15 | 155 | A443 | black (French) | rubber | Rubber Ring for 25 mm Pulley | 4 | 186a | A186 | black (French) | rubber | Driving Band, 6" Light | 2 | 186g | A695 | grey (French) | rubber | Driving Band, 65mm, light | 1 | 235 | A235 | zinc (French) | plated steel | Narrow Strip, 2 1/2" x 11/32" | 2 | 235b | A414 | zinc (French) | plated steel | Narrow Strip, 3 1/2" x 11/32" | 8 | 235d | A415 | zinc (French) | plated steel | Narrow Strip, 4 1/2" x 11/32" | 2 | 235g | A416 | zinc (French) | plated steel | Narrow Strip, 1 1/2" x 11/32" | 8 | 260c | A420 | blue (French) | plastic | Mini Strip 38 mm, 6.4 mm thick | 14 | 260d | A421 | black (French) | plastic | Track Rod End Pin | 1 | 260f | A423 | green light (French) | plastic | Steering Arm | 12 | 260j | A260 | grey dark (French) | plastic | Obtuse Corner Bracket 38 x 25 mm, 3 mm thick | 5 | 315 | A315 | zinc (French) | plated steel | Axle Rod Triangular Section 130mm | 1 | 315a | A427 | zinc (French) | plated steel | Axle Rod Triangular Section 115mm | 1 | 315b | A428 | zinc (French) | plated steel | Axle Rod Triangular Section 100mm | 3 | 316(2) | A316 | zinc (French) | plated steel | Axle Rod Triangular Section 90mm | 8 | 316a | A516 | zinc (French) | plated steel | Axle Rod Triangular Section 63mm | 2 | 316b | A429 | zinc (French) | plated steel | Axle Rod Triangular Section 75mm | 4 | 317(2) | A317 | zinc (French) | plated steel | Axle Rod Triangular Section 50mm | 6 | 318a | A318 | zinc (French) | plated steel | Axle Rod Triangular Section 38/40mm | 4 | 318c | A430 | zinc (French) | plated steel | Axle Rod Triangular Section 32mm | 2 | 811a | A436 | zinc (French) | plated steel | Narrow Double Bracket, 1" x 1/2" | 1 | 812b | A812 | zinc (French) | plated steel | Narrow Angle Bracket, 1" x 1/2" | 2 | 812d | A437 | zinc (French) | plated steel | Narrow Obtuse Angle Bracket 1" x 1/2" | 2 | B015 | blue (French) | plastic | Polygonal Bracket, 6.4 mm thick | 5 | B051(1) | grey dark (French) | plastic | Strip, 60 mm, 6.4 mm thick | 1 | B051(1) | blue (French) | plastic | Strip, 60mm, 6.4 mm thick | 1 | B634 | zinc (French) | plated steel | Axle Rod Triangular Section 165mm | 1 | B696 | black (French) | chemically blackened steel | Pivot Bolt, 38mm (1 1/2"), hex socket head | 12 | B698 | zinc (French) | plated steel | Narrow Slotted Strip 60 mm | 4 | C330 | zinc (French) | plated steel | Narrow Angle Bracket, 12 x 12 mm | 9 | C372 | green light (French) | non descript (other) | Shock Absorber, complete | 6 | C379 | zinc (French) | plated steel | Pivot Bolt, 44.5 mm (1 3/4"), hex socket head | 2 | C383 | grey dark (French) | non descript (other) | Pull Back Motor | 1 | C483 | zinc (French) | plated steel | Narrow Obtuse Angle Bracket, 12 x 12 mm | 2 | C768 | zinc (French) | plated steel | Narrow Strip, 1 1/2" (38 mm), 5 holes | 8 | C771 | zinc (French) | plated steel | Narrow Strip, 2 1/2" (63 mm), 9 holes | 8 | C772 | zinc (French) | plated steel | Narrow Strip, 3" (75 mm), 11 holes | 2 | C775 | zinc (French) | plated steel | Narr. Obt. Corn. Brkt, 1" x 1 1/2" (25 x 38 mm), 3 x 5 holes | 10 | C867 | green light (French) | plastic | Spring Grip, for Triangular Shafts | 10 | C868 | green light (French) | plastic | Mini Strip, 25 mm, 6.4 mm thick, 3 holes | 2 | C881 | green light (French) | plastic | Knob, for Triangular Shafts | 4 | C887 | blue (French) | plastic | Seat | 4 | C888 | green light (French) | plastic | Mini Strip 38mm, Geared, 6.4 mm thick, 5 holes | 6 | C904 | green light (French) | plastic | Worm Gear, 1/2" (13 mm) diam., triangular hole | 1 | C935 | zinc (French) | plated steel | Pivot Bolt, 32 mm (1 1/4"), hex socket head | 6 | C949 | zinc (French) | plated steel | Axle Rod, Triangular Section, 25 mm | 2 | C994 | red (French) | plastic and zinc plated steel | Allen Screwdriver | 3 | D002 | black (French) | rubber | All Terrain Tyre for C996, D379, D424 and D677 | 8 | D005 | green light (French) | plastic | Snap Fasteners, 11 mm | 12 | D018 | white (French) | plastic | Braced Asymmetric Triangular Plate, 83 x 34 mm | 8 | D023 | white (French) | plastic | Excavator Body Side | 12 | D031 | white (French) | plastic | Braced Trapezoidal Girder, 64 x 35 mm, 1/8" thick | 2 | D032 | white (French) | plastic | Frame Plate, 114 x 50 mm, 5 mm thickness | 8 | D035 | green light (French) | plastic | Wheel Rays | 5 | D036 | green light (French) | plastic | Pointer | 2 | D037 | blue (French) | plastic | Braced Obtuse Channel Segment, 3" x 2" x 1/8" thick | 1 | D038 | blue (French) | plastic | Four Hole Obtuse Strip, 1/4" thick | 8 | D048 | blue (French) | plastic | Two Hole Strip, 1/8" thick | 12 | D049 | blue (French) | plastic | Three Hole Strip, 1/8" thick | 1 | D050 | grey dark (French) | plastic | Four Hole Strip, 1/8" thick | 3 | D051 | white (French) | plastic | Obtuse Semi-Angle Girder, 2 1/2" x 1/8" thick, right | 2 | D051 | blue (French) | plastic | Obtuse Semi-Angle Girder, 2 1/2" x 1/8" thick, right | 2 | D052 | white (French) | plastic | Obtuse Semi-Angle Girder, 2 1/2" x 1/8" thick, left | 2 | D052 | blue (French) | plastic | Obtuse Semi-Angle Girder, 2 1/2" x 1/8" thick, left | 2 | D053 | white (French) | plastic | Flat Trunnion, 1/8" thick | 4 | D072 | blue (French) | plastic | Obtuse Bracket, 1 3/4" x 1" ,1/8" thick, right | 1 | D073 | blue (French) | plastic | Obtuse Bracket, 1 3/4" x 1" ,1/8" thick, left | 1 | D079 | blue (French) | plastic | Obtuse Bracket, 1 3/4" x 1 1/2" x 1/8" thick, left | 2 | D081 | blue (French) | plastic | Angle Bracket, 1/2" x 1 1/2", 1/8" thick, right | 1 | D082 | blue (French) | plastic | Angle Bracket, 1/2" x 1 1/2", 1/8" thick, left | 1 | D089 | blue (French) | plastic | Motorcycle Body Side, 57 x 38 mm, left | 1 | D090 | blue (French) | plastic | Motorcycle Body Side, 57 x 38 mm, right | 1 | D102 | white (French) | plastic | Plate, 76 x 51 mm (3" x 2") | 2 | D103 | grey dark (French) | plastic | Plate, 51 x 25 mm (2" x 1") | 3 | D106 | green light (French) | plastic | Helicopter Blade, 111 mm | 4 | D121 | blue (French) | plastic | Triangular plate, 3 1/2" x 1 1/2", flexible | 3 | D143 | blue (French) | plastic | Nine Hole Strip, 1/8" thick | 7 | D207 | white (French) | plastic | Nine Hole Narrow Strip, flexible | 2 | D208 | white (French) | plastic | Five Hole Narrow Strip, flexible | 2 | D225 | grey (French) | plastic | Battery Box for D226 and D602 | 2 | D232 | green light (French) | plastic | Wheel Hub, 28 mm diam. x 16 mm width | 4 | D247 | black (French) | rubber | Tyre for D232/D310/D311, 34 mm diam., 16 mm width | 4 | D257 | blue (French) | plastic | Obtuse Bracket, 1 3/4" x 1 3/4" ,1/8" thick, right | 1 | D258 | blue (French) | plastic | Obtuse Bracket, 1 3/4" x 1 3/4" ,1/8" thick, left | 1 | D277 | black (French) | plastic | Plastic Lock Nut | 5 | D292 | grey dark (French) | plastic | Spacer 12 mm long | 41 | D307 | white (French) | plastic | Obtuse Angled Plate Right | 1 | D308 | white (French) | plastic | Obtuse Angled Plate Left | 1 | D338 | blue (French) | plastic | Five Hole Strip, 1/8" thick | 15 | D349 | grey dark (French) | plastic | Flanged Plate, 61 x 50 mm (2 1/2" x 2") | 5 | D352 | blue (French) | plastic | Double Obtuse Angled Strip 190 mm | 4 | D353 | grey dark (French) | plastic | Flanged Plate, 61 x 25 mm (2 1/2" x 1") | 10 | D356 | white (French) | plastic | Moulded Plate 25 mm x 25mm (1" x 1") | 3 | D358 | blue (French) | plastic | Z Shaped Strip, 11 Holes | 14 | D361 | green light (French) | plastic | Suspension Unit Female | 4 | D362 | green light (French) | plastic | Suspension Unit Male | 4 | D365 | blue (French) | plastic | Angled Frame Bracket Left Hand | 2 | D366 | blue (French) | plastic | Angled Frame Bracket Right Hand | 2 | D373 | white (French) | plastic | Corner Bracket 2 x 2 | 2 | D395 | grey dark (French) | plastic | Flanged Plate, 61 x 38 mm (2 1/2" x 1 1/2") (Same as M237) | 2 | D406 | grey dark (French) | plastic | Angle Girder with Lugs, Seven Holes | 4 | D424 | green light (French) | plastic | Wheel Hub, 38 mm diam. x 26 mm width | 8 | D431 | white (French) | plastic | Girder Frame 5" x 1" | 4 | D467 | zinc (French) | plated steel | Narr. Corn. Brkt, 1 1/2" x 1 1/2" (38 x 38 mm), 5 x 5 holes | 8 | D468 | non descript (other) | Meccablock Electric Motor | 1 | D472 | white (French) | plastic | Trapezium Shaped Plate 50 mm (max) x 38 mm (2" (max) x 1 1/2") (M230) | 3 | D485 | grey dark (French) | plastic | Flanged Plate, 38 x 38 mm (1 1/2" x 1 1/2 ") | 8 | D486 | clear (French) | plastic | Light Cluster | 2 | D487 | grey dark (French) | plastic | Flanged Plate, 25 x 25 mm (1" x 1 ") | 8 | D488 | grey dark (French) | plastic | Flanged Plate, 38 x 25 mm (1 1/2" x 1 ") | 2 | D489 | white (French) | plastic | Plate 38 x 25 mm (1 1/2" x 1 ") 1/8" thick | 6 | D490 | grey dark (French) | plastic | Flanged Plate, 50 x 25 mm (2" x 1 ") | 7 | D494 | blue (French) | plastic | Digger Bucket | 2 | D496 | white (French) | plastic | Moulded Plate 12 mm x 25mm (1/2" x 1") | 2 | D499 | red (French) | plastic and zinc plated steel | Box Spanner, half plastic (replaces C993 in 2017) | 3 | D512 | green light (French) | plastic | Wheel Hub 25 mm diam 12 mm wide | 4 | D514 | black (French) | rubber | Tyre for D512 | 4 | D515 | zinc (French) | plated steel | Trapezoidal Flexible Plate, 1 1/2" x 1 1/2" | 1 | D518 | green light (French) | plastic | Wheel Hub 35 mm diam. 20 mm wide | 4 | D519 | black (French) | rubber | Tyre for D518 | 4 | D586 | (rd-wt) | plastic | Hole Punch for Cardboard | 2 | D602 | grey dark (French) | plastic | Electric Motor | 4 | M001 | grey dark (French) | plastic | Angle Girder, 38 mm (1 1/2") (D101) | 6 | M006 | blue (French) | plastic | Servo Arm Extension | 4 | M008 | white (French) | plastic | Braced Plate, 215 x 112 mm (8 1/2" x 4 1/2") | 8 | M010 | grey dark (French) | plastic | Double Bracket | 4 | M016 | grey dark (French) | plastic | Servo Mount | 4 | M017 | white (French) | plastic | Plate 190 x 25 mm (7 1/2" x 1") (D114) | 6 | M031 | grey dark (French) | plastic | Castor Wheel | 2 | M044 | green light (French) | plastic | Cable Clip | 12 | M046 | white (French) | plastic | Plate, 64 x 52 mm (2 1/2" x 1") | 2 | M100 | grey dark (French) | plastic | Servo Cover Top | 4 | M101 | grey dark (French) | plastic | Servo Cover Bottom | 4 | M218 | white (French) | plastic | Plate, 127 x 25 mm (5" x 1") (D298) | 9 | M225 | blue (French) | plastic | Trapezoidal Plate, 100x 50 mm (4" x 2") | 4 | M226 | white (French) | plastic | Plate, 100 x 90 mm (4" x 3 1/2") | 2 | M246 | green light (French) | plastic | Micronoid Rear Wheel Hubs, diam. 15 mm | 4 | M247 | white (French) | plastic | Micronoid Half Foot, right | 4 | M248 | white (French) | plastic | Micronoid Half Foot, left | 4 | M249 | green light (French) | plastic | Micronoid Front Wheels, diam. 27 mm | 4 | M254 | black (French) | chemically blackened steel | Locknut, hexagonal | 8 | M255 | black (French) | chemically blackened steel | Short Threaded Tip Pivot Bolt, 10.5 mm (7/16") | 8 | M270 | white (French) | plastic | Trapeziod Plate 3 1/2" x 1 1/2" | 2 | M276 | grey dark (French) | plastic | Flanged Plate with Slotted Holes 3 1/2" x 1 1/2" | 2 | M278 | grey dark (French) | plastic | Angle Girder , Two Holes | 2 | M296 | white (French) | plastic | Z Shaped Plate | 2 | M303 | white (French) | plastic | Plate with Cutout | 4 | M901 | green (French) | non descript (other) | Servo | 4 | M934 | grey dark (French) | non descript (other) | IR Sensor | 2 | M969 | white (French) | plastic | Servo Motor U Shaped Bracket | 4 | M970 | grey dark (French) | plastic | Top Half Casing for Servo Motor | 4 | M971 | grey dark (French) | plastic | Bottom Half Casing for Servo Motor | 4 | M972 | grey dark (French) | non descript (other) | Control Unit for Servo Motor | 1 | M973 | non descript (other) | Cable Extension | 2 | M974 | non descript (other) | Servo Motor | 4 | M975 | non descript (other) | Switch Button | 2 | M976 | non descript (other) | Li-ion 6.4V rechargeable battery | 2 | M977 | black (French) | non descript (other) | Electric Motor | 1 | M978 | green light (French) | plastic | Triangular Hole Driving Adaptor for D424 Wheel Hubs | 4 | M979 | non descript (other) | USB Cable | 1 | M984 | non descript (other) | Cable Extension | 4 |
Total Number of parts in the set is 2839