Meccano Set Parts Lists
MECCANO SET PARTS LIST
Set A (1965 - 70)
Compiled by Timothy Edwards
Set A (1965 - 70) | |||||
---|---|---|---|---|---|
Part No. | Colour | Part Description | Quantity | ||
P50 | Yellow | 2 Hole Strip | 4 | ||
P51 | Yellow | 3 Hole Strip | 2 | ||
P52 | Yellow | 4 Hole Strip | 2 | ||
P53 | Yellow | 5 Hole Strip | 2 | ||
P54 | Black | Base | 1 | ||
P55 | Blue | Bolt (Hollow core) | 12 | ||
P55 | Blue | Bolt (Solid core) | * | ||
P56 | Blue | Bolt, Long (Hollow core) | 2 | ||
P56 | Blue | Bolt, Long (Solid core) | * | ||
P57 | Blue | Nut (Only one end rounded) | 14 | ||
P58 | Black | Spanner | 1 | ||
P59 | Red | Angle Bracket | 4 | ||
P60 | Red | Double Angle Bracket | 4 | ||
P62 | Red | Pulley | 1 | ||
P63 | Red | Axle Clip | 2 | ||
P64 | Red | Hook | 1 | ||
P65 | Red | 4 1/2" Axle | 2 | ||
P78 | Grey | Collet Nut | 4 | ||
P79 | Red | Road Wheel | 4 |
1965 RANGE
These were the first Plastic Meccano sets. The workbox was the C set in a wooden box designed for use in schools. The wooden box had holes drilled in it, to allow it to be used as a base for models.
BX Conversion Set - These are very rare. It is not known when these were introduced. However it is thought to be later rather than earlier. The only reference I have found to it so far is in an April 1970 Dealers Order List
Note * - Early bolts were hollow core type which are thought to have changed to solid core in around 1971.
Note ** - The sprockets, were initially coloured grey. It is not certain when they changed to yellow, although it is thought to be quite early.
Note ? - Cord changed from green to blue during the period 1965 to 1970.