Meccano Set Parts Lists
UK MECCANO SET PARTS LIST
Outfit F (1935)
Compiled by Timothy Edwards
Outfit F (1935) | |||||
---|---|---|---|---|---|
Set P/N | Modern P/N | Part Description | Quantity | ||
1 | Perforated strip 12 1/2" 25hole | 10 | |||
2 | Perforated strip 5 1/2" 11hole | 18 | |||
3 | Perforated strip 3 1/2" 7hole | 6 | |||
4 | Perforated strip 3" 6hole | 2 | |||
5 | Perforated strip 2 1/2" 5hole | 12 | |||
6a | Perforated strip 1 1/2" 3hole | 2 | |||
8 | Angle girder 12 1/2" 25hole | 8 | |||
10 | Fishplate | 8 | |||
11 | Double Angle Bracket | 4 | |||
12 | Angle bracket | 14 | |||
12a | Angle bracket 1x1" | 4 | |||
12c | Obtuse Angle bracket | 4 | |||
13 | Axle rod 11 1/2" | 1 | |||
15 | Axle rod 5" | 2 | |||
15a | Axle rod 4 1/2" | 3 | |||
15b | Axle rod 4" | 2 | |||
16 | Axle rod 3 1/2" | 4 | |||
17 | Axle rod 2" | 2 | |||
18a | Axle rod 1 1/2" | 4 | |||
19 | 19h | Crank handle - large (5") | 1 | ||
19b | Pulley 3" dia | 2 | |||
19s | Crank handle - small (3 1/2") | 1 | |||
20a | Pulley 2" dia | 2 | |||
20b | Flanged wheel 3/4" dia | 4 | |||
21 | Pulley 1 1/2" dia | 1 | |||
22 | Pulley 1" dia | 4 | |||
22a | Pulley 1" dia without boss | 2 | |||
23 | Pulley 1/2" dia without boss - metal | 1 | |||
24 | Bush wheel 1 3/8" dia 8 hole | 1 | |||
26 | Pinion 1/2"dia, 1/4"face, 19t | 2 | |||
27a | Gear wheel 1 1/2" dia, 57t | 1 | |||
32 | Worm | 1 | |||
34 | Spanner | 1 | |||
35 | Spring clip | 14 | |||
36 | Screwdriver - Standard Bent Rod | 1 | |||
37a | Nut, square | 130 | |||
37b | Bolt, 7/32" long | 124 | |||
38 | Washer 3/4" dia | 14 | |||
40 | Hank of cord | 3 | |||
43 | Tension Spring 2" | 1 | |||
44 | Bent strip stepped | 1 | |||
45 | Double bent strip | 2 | |||
46 | Double angle strip 2 1/2x1" | 1 | |||
48 | Double angle strip 1 1/2x1/2" | 2 | |||
48a | Double angle strip 2 1/2x1/2" | 10 | |||
48b | Double angle strip 3 1/2x1/2" | 2 | |||
51 | Flanged plate 2 1/2x1 1/2" | 1 | |||
52 | Flanged plate 5 1/2x2 1/2" - 4 flanges | 2 | |||
53 | Flanged plate 3 1/2x2 1/2" | 3 | |||
54a | 54 | Flanged Sector Plate 4 1/2" | 2 | ||
57c | Loaded Hook (small) - ball type | 1 | |||
59 | Collar | 4 | |||
62 | Crank | 2 | |||
63 | Coupling | 1 | |||
90 | Curved strip 2 1/2", 2 3/8"r | 2 | |||
90a | Curved strip stepped, 2 1/2", 1 3/8r | 4 | |||
111 | Bolt 3/4" | 2 | |||
111c | Bolt 3/8" | 6 | |||
115 | Threaded Pin - Square shoulder | 2 | |||
116 | Fork piece - large | 1 | |||
116a | Fork piece - small | 1 | |||
125 | Reverse angle bracket 1/2" | 4 | |||
126 | Trunnion | 2 | |||
126a | Flat trunnion | 2 | |||
147b | Pivot bolt with 2 nuts | 1 | |||
162 | Boiler complete | 1 | |||
163 | Sleeve piece | 2 | |||
164 | Chimney adapter | 1 | |||
165 | Swivel bearing | 1 | |||
166 | End bearing | 1 | |||
176 | Anchoring spring for cord | 1 | |||
186 | Drive band 2 1/2" | 1 | |||
187 | Road wheel 2 1/2" dia - metal | 4 | |||
188 | Fibre plate 2 1/2 x 1 1/2" (See note below) | 2 | |||
189 | Fibre plate 5 1/2 x 1 1/2" (See note below) | 2 | |||
190 | Fibre plate 2 1/2 x 2 1/2" (See note below) | 4 | |||
191 | Fibre plate 4 1/2 x 2 1/2" (See note below) | 2 | |||
193 | Strip plate 2 1/2 x 2 1/2" (See note below) | 1 | |||
195 | Strip plate 5 1/2 x 2 1/2" (See note below) | 2 | |||
197 | Strip plate 12 1/2 x 2 1/2" (See note below) | 2 | |||
198 | Hinged flat plate 4 1/2 x 2 1/2" | 1 |
NOTE
The fibre, strip and flexible plates all had square corners and round holes