Meccano Set Parts Lists
UK MECCANO SET PARTS LIST
Outfit H (1935)
Compiled by Timothy Edwards
Outfit H (1935) | |||||
---|---|---|---|---|---|
Set P/N | Modern P/N | Part Description | Quantity | ||
1 | Perforated strip 12 1/2" 25hole | 16 | |||
1b | Perforated strip 7 1/2" 15hole | 2 | |||
2 | Perforated strip 5 1/2" 11hole | 26 | |||
2a | Perforated strip 4 1/2" 9hole | 4 | |||
3 | Perforated strip 3 1/2" 7hole | 12 | |||
4 | Perforated strip 3" 6hole | 8 | |||
5 | Perforated strip 2 1/2" 5hole | 36 | |||
6 | Perforated strip 2" 4hole | 4 | |||
6a | Perforated strip 1 1/2" 3hole | 6 | |||
8 | Angle girder 12 1/2" 25hole | 14 | |||
8a | Angle girder 9 1/2" 19hole | 4 | |||
8b | Angle girder 7 1/2" 15hole | 2 | |||
9 | Angle girder 5 1/2" 11hole | 4 | |||
9d | Angle girder 2 1/2" 5hole | 1 | |||
10 | Fishplate | 12 | |||
11 | Double Angle Bracket | 8 | |||
12 | Angle bracket | 36 | |||
12a | Angle bracket 1x1" | 6 | |||
12c | Obtuse Angle bracket | 4 | |||
13 | Axle rod 11 1/2" | 2 | |||
13a | Axle rod 8" | 1 | |||
14 | Axle rod 6 1/2" | 3 | |||
15 | Axle rod 5" | 4 | |||
15a | Axle rod 4 1/2" | 5 | |||
15b | Axle rod 4" | 2 | |||
16 | Axle rod 3 1/2" | 5 | |||
16a | Axle rod 2 1/2" | 3 | |||
17 | Axle rod 2" | 5 | |||
18a | Axle rod 1 1/2" | 4 | |||
19 | 19h | Crank handle - large (5") | 1 | ||
19a | Spoked Wheel 3" dia, with boss | 4 | |||
19b | Pulley 3" dia | 2 | |||
19s | Crank handle - small (3 1/2") | 1 | |||
20 | Flanged wheel 1 1/8'dia, 4hole | 4 | |||
20a | Pulley 2" dia | 4 | |||
20b | Flanged wheel 3/4" dia | 4 | |||
21 | Pulley 1 1/2" dia | 2 | |||
22 | Pulley 1" dia | 4 | |||
22a | Pulley 1" dia without boss | 3 | |||
23 | Pulley 1/2" dia without boss - metal | 3 | |||
23a | Pulley 1/2" dia | 1 | |||
24 | Bush wheel 1 3/8" dia 8 hole | 2 | |||
26 | Pinion 1/2"dia, 1/4"face, 19t | 3 | |||
27a | Gear wheel 1 1/2" dia, 57t | 2 | |||
28 | Contrate Gear 1 1/2" dia 50t | 1 | |||
29 | Contrate Gear 3/4" dia, 25t | 2 | |||
32 | Worm | 2 | |||
34 | Spanner | 2 | |||
35 | Spring clip | 19 | |||
36 | Screwdriver - Standard Bent Rod | 1 | |||
36b | Screwdriver - Special (steel handled) | 1 | |||
37a | Nut, square | 206 | |||
37b | Bolt, 7/32" long | 200 | |||
38 | Washer 3/4" dia | 24 | |||
40 | Hank of cord | 6 | |||
41 | Propeller blade | 2 | |||
43 | Tension Spring 2" | 1 | |||
44 | Bent strip stepped | 1 | |||
45 | Double bent strip | 3 | |||
46 | Double angle strip 2 1/2x1" | 4 | |||
47 | Double angle strip 2 1/2x1 1/2" | 1 | |||
47a | Double angle strip 3x1 1/2" | 2 | |||
48 | Double angle strip 1 1/2x1/2" | 2 | |||
48a | Double angle strip 2 1/2x1/2" | 10 | |||
48b | Double angle strip 3 1/2x1/2" | 6 | |||
48d | Double angle strip 5 1/2x1/2" | 4 | |||
50a | 50 | Eye Piece with boss | 1 | ||
51 | Flanged plate 2 1/2x1 1/2" | 1 | |||
52 | Flanged plate 5 1/2x2 1/2" - 4 flanges | 4 | |||
52a | Flat plate 5 1/2x3 1/2" | 4 | |||
53 | Flanged plate 3 1/2x2 1/2" | 5 | |||
53a | Flat plate 4 1/2x2 1/2" | 2 | |||
54a | 54 | Flanged Sector Plate 4 1/2" | 2 | ||
57c | Loaded Hook (small) - ball type | 2 | |||
59 | Collar | 19 | |||
62 | Crank | 2 | |||
62b | Double Arm Crank | 2 | |||
63 | Coupling | 6 | |||
65 | Centre fork | 1 | |||
70 | Flat plate 5 1/2x2 1/2" | 1 | |||
77 | Triangular plate 1" | 2 | |||
80a | Screwed rod 3 1/2" | 1 | |||
90 | Curved strip 2 1/2", 2 3/8"r | 6 | |||
90a | Curved strip stepped, 2 1/2", 1 3/8r | 4 | |||
94 | Sprocket chain | 40" | |||
95 | Sprocket wheel 2"d, 36t | 2 | |||
96 | Sprocket wheel 1"d, 18t | 2 | |||
96a | Sprocket wheel 3/4"d, 14t | 1 | |||
99 | Braced girder 12 1/2" 25hole - double closed | 4 | |||
100 | Braced girder 5 1/2" 11hole - double closed | 2 | |||
102 | Single bent strip | 1 | |||
103f | Flat girder 2 1/2" 5hole | 4 | |||
108 | Corner Gusset | 2 | |||
109 | Face plate 2 1/2" dia | 2 | |||
111 | Bolt 3/4" | 3 | |||
111c | Bolt 3/8" | 6 | |||
115 | Threaded Pin - Square shoulder | 2 | |||
116 | Fork piece - large | 1 | |||
116a | Fork piece - small | 1 | |||
125 | Reverse angle bracket 1/2" | 4 | |||
126 | Trunnion | 4 | |||
126a | Flat trunnion | 5 | |||
128 | Bell crank with boss | 1 | |||
130 | Eccentric triple throw | 2 | |||
142a | Tyre for 2" pulley | 4 | |||
147a | Pawl with Boss | 1 | |||
147b | Pivot bolt with 2 nuts | 1 | |||
148 | Ratchet wheel | 1 | |||
160 | Channel bearing | 1 | |||
162 | Boiler complete | 1 | |||
163 | Sleeve piece | 2 | |||
164 | Chimney adapter | 1 | |||
165 | Swivel bearing | 2 | |||
166 | End bearing | 1 | |||
176 | Anchoring spring for cord | 1 | |||
186 | Drive band 2 1/2" | 1 | |||
187 | Road wheel 2 1/2" dia - metal | 4 | |||
188 | Fibre plate 2 1/2 x 1 1/2" (See note below) | 2 | |||
189 | Fibre plate 5 1/2 x 1 1/2" (See note below) | 2 | |||
190 | Fibre plate 2 1/2 x 2 1/2" (See note below) | 4 | |||
191 | Fibre plate 4 1/2 x 2 1/2" (See note below) | 2 | |||
193 | Strip plate 2 1/2 x 2 1/2" (See note below) | 1 | |||
195 | Strip plate 5 1/2 x 2 1/2" (See note below) | 6 | |||
197 | Strip plate 12 1/2 x 2 1/2" (See note below) | 4 | |||
198 | Hinged flat plate 4 1/2 x 2 1/2" | 1 |
NOTE
The fibre, strip and flexible plates all had square corners and round holes