Meccano Set Parts Lists
UK MECCANO SET PARTS LIST
Set 2 (1978-81)
Compiled by Timothy Edwards
Set 2 (1978-81) | |||||
---|---|---|---|---|---|
Set P/N | Modern P/N | Part Description | Quantity | ||
1b | Perforated strip 7 1/2" 15hole | 2 | |||
2 | Perforated strip 5 1/2" 11hole | 2 | |||
6 | Perforated strip 2" 5hole | 2 | |||
9 | Angle girder 5 1/2" 11hole | 2 | |||
9f | Angle girder 1 1/2" 3hole | 2 | |||
10 | Flat bracket/fishplate | 2 | |||
12 | Angle bracket | 4 | |||
12b | Angle bracket 1" x 1/2" | 2 | |||
16 | Axle rod 3 1/2" | 1 | |||
16a | Axle rod 2 1/2" | 2 | |||
21 | Pulley 1 1/2" | 2 | |||
23 | 23bp | Pulley 1/2" w/o boss - plastic | 4 | ||
26 | Pinion 1/2"d, 1/4"face, 19t | 1 | |||
27a | Gear wheel 1 1/2"d,57t | 1 | |||
34c | Hex spanner | 2 | |||
35 | Spring clip | 4 | |||
36b | Screwdriver - Red plastic handle - Multikit | 1 | |||
37b | Bolt, 7/32" long | 63 | |||
37c | Nut, Hex (See note below) | 75 | |||
38 | Washer 3/8" | 20 | |||
38d | Washer 3/4" | 2 | |||
40 | Hank of cord | 1 | |||
48 | Double angle strip 1 1/2x1/2" | 2 | |||
48a | Double angle strip 2 1/2x1/2" | 2 | |||
51 | Flanged plate 2 1/2x1 1/2" | 1 | |||
53 | Flanged plate 3 1/2x2 1/2" | 1 | |||
57c | Loaded Hook (large) - barrel type | 1 | |||
69a | Grub Screw 5/32" | 2 | |||
74 | Flat plate 1 1/2" x 1 1/2" | 2 | |||
81 | Screwed rod 2" | 1 | |||
90a | Curved strip stepped, 2 1/2", 1 3/8r | 2 | |||
103f | Flat girder 2 1/2" 5hole | 2 | |||
111 | Bolt 3/4" | 2 | |||
111a | Bolt 1/2" | 4 | |||
115a | Thread Pin Long 1 3/8" - no shoulder | 1 | |||
125 | Reverse angle bracket 1/2" | 1 | |||
126a | Flat trunnion | 2 | |||
154a | Corner angle bracket, right hand | 1 | |||
154b | Corner angle bracket, left hand | 1 | |||
160 | Channel bearing | 1 | |||
186a | Drive band 6" light | 2 | |||
190a | Flexible plate 3 1/2 x 2 1/2" (See note below) | 2 | |||
194 | Plastic plate 2 1/2 x 1 1/2" | 4 | |||
194a | Plastic plate 2 1/2 x 2 1/2" | 2 | |||
235a | Narrow strip 3 x 11/32" wide | 2 | |||
235b | Narrow strip 3 1/2 x 11/32" wide | 2 | |||
235d | Narrow strip 4 1/2 x 11/32" wide | 2 | |||
452 | Tyre for 1/2" pulley 1 1/16" | 4 | |||
611 | Miniature plug | 4 | |||
618 | Connecting wire | 1 | |||
11053 | Motor 4-5V | 1 | |||
13624 | Battery box 3V | 1 |
NOTE
The changeover from square to hexagonal nuts is assumed to be 1973. However, this date probably varied a bit between different sets.