Meccano Set Parts Lists
UK MECCANO SET PARTS LIST
Mechanisms Outfit (1972-78)
Compiled by Timothy Edwards
Mechanisms Outfit (1972-78) | |||||
---|---|---|---|---|---|
Set P/N | Modern P/N | Part Description | Quantity | ||
2 | Perforated strip 5 1/2" 11hole | 4 | |||
5 | Perforated strip 2 1/2" 5hole | 6 | |||
6a | Perforated strip 1 1/2" 3hole | 9 | |||
10 | Flat bracket/fishplate | 9 | |||
12 | Angle bracket | 10 | |||
14 | Axle rod 6 1/2" | 1 | |||
15b | Axle rod 4" | 2 | |||
16 | Axle rod 3 1/2" | 1 | |||
17 | Axle rod 2" | 2 | |||
18a | Axle rod 1 1/2" | 2 | |||
22 | Pulley 1" | 2 | |||
22a | Pulley 1" w/o boss | 4 | |||
24 | Bush wheel 1 3/8" dia, 8 holes | 1 | |||
25 | Pinion 3/4"d, 1/4"face, 25t | 2 | |||
26 | Pinion 1/2"d, 1/4"face, 19t | 3 | |||
27 | Gear wheel 1 1/4"d, 50t | 1 | |||
27a | Gear wheel 1 1/2"d,57t | 1 | |||
28 | Contrate Gear 1 1/2" | 1 | |||
29 | Contrate Gear 3/4" | 2 | |||
32 | Worm | 1 | |||
34c | Hex spanner | 1 | |||
36 | Screwdriver - Standard Bent Rod | 1 | |||
37b | Bolt, 7/32" long | 30 | |||
37c | Nut, Hex (See note below) | 30 | |||
38 | Washer 3/8" | 18 | |||
40 | Hank of cord | 1 | |||
47 | Double angle strip 2 1/2x1 1/2" | 1 | |||
53 | Flanged plate 3 1/2x2 1/2" | 1 | |||
53a | Flat plate 4 1/2x2 1/2" | 2 | |||
59 | Collar | 6 | |||
63 | Coupling | 1 | |||
81 | Screwed rod 2" | 1 | |||
111 | Bolt 3/4" | 2 | |||
111a | Bolt 1/2" | 2 | |||
111c | Bolt 3/8" | 2 | |||
120b | Compression spring | 2 | |||
126 | Trunnion | 1 | |||
126a | Flat trunnion | 2 | |||
155 | Rubber Ring for 1" pulley - black | 2 | |||
186 | Drive band 2 1/2" light | 1 |
NOTE
The changeover from square to hexagonal nuts is assumed to be 1973. However, this date probably varied a bit between different sets.