Meccano Set Parts Lists
UK MECCANO SET PARTS LIST
Outfit 1 (1916-17)
Compiled by Timothy Edwards
| Outfit 1 (1916-17) | |||||
|---|---|---|---|---|---|
| Set P/N | Modern P/N | Part Description | Quantity | ||
| 1 | Perforated strip 12 1/2" 25 hole | 4 | |||
| 2 | Perforated strip 5 1/2" | 6 | |||
| 3 | Perforated strip 3 1/2" 7 hole | 1 | |||
| 5 | Perforated strip 2 1/2" 5 hole | 9 | |||
| 10 | Flat Bracket | 4 | |||
| 11 | Double angle bracket, 3/4" wide | 1 | |||
| 12 | Angle bracket | 12 | |||
| 15a | Axle rod 4 1/2" | 3 | |||
| 17 | Axle rod 2" (See note below) | 2 | |||
| 18 | 18b | Axle rod 1" | 1 | ||
| 19 | 19s/19h | Crank handle - length varied | 1 | ||
| 22 | Pulley 1" with boss | 4 | |||
| 22a | Pulley 1" without boss | 2 | |||
| 23 | Pulley 1/2" without boss - metal | 1 | |||
| 24 | Bush wheel | 1 | |||
| 34 | Spanner - cranked (early ones had hex ends) | 1 | |||
| 35 | Spring clip | 6 | |||
| 36 | Screwdriver - flat type | 1 | |||
| 37 | Nut and bolt (bolt 5/16" long) | 30 | |||
| 40 | Hank of cord | 1 | |||
| 44 | Cranked bent strip | 1 | |||
| 52 | Flanged Plate 5 1/2" x 2 1/2" - 2 flanges | 1 | |||
| 54 | Flanged sector plate 4" | 2 | |||
| 57 | Wire Hook | 1 | |||
| 60 | 48a | Bent Strip (Double Angle Strip) 2 1/2" x 1/2" | 4 | ||
NOTES
1. The change from sawcut keyways and grooved rods to tunnel keyways and smooth rods is thought to be about 1906. However it could have been in 1907. During the changeover period some wheels/pulleys/gears etc. had both types of keyway.
2. The date of changeover from key fixing to bosses is taken as per the manuals. In practice it may have been a year earlier.
3. It is thought that normal perforated strips with rounded ends were introduced early-middle of 1908
4. The angle girders & braced girders initially had square ends. This changed to rounded ends in 1918.