Arkirecto

Select System Type Select Country System Text Search
(1207 systems found)

Arkirecto Construction Sets

Arkirecto was a constructional system used to make buildings and other models. It was made in the UK during the mid 1930s

Manufacturer / Distributor

Arkirecto Ltd., Carlton House, Regent Street, London, SW1, UK

Info from the Metal Constructional Systems Database for ARKIRECTO (Ref:ARK)

Maker

System Type
Buildings and Non-Meccano type

Country
United Kingdom

Dates
1934 to 1936

Material
Steel

Thread
1/4x40 (see comment *¹)

Boss Type
collet fixing

Boss Thread
----

Diametrical Pitch of Gears
32

No. of Parts in System
82

Hole Pitch (Spacing) (mm)
12.7 (multiples of value shown, including half.)

Diameter of holes in Strips(mm)
3.2

Diameter of the Bore in Bosses(mm)
3.1 (see comment *²)

Diameter of Axle Rods(mm)
3.1 (see comment *³)

Types of Nuts and Bolts
Nuts: --
Bolts: --

Material/Finish of Nuts and Bolts
-- --

Size of the Nuts across Flats (mm)
---

Bolt diameter (mm)
---

Comments
Sets: mechanical, architectural & combined. Parts push/clip together; Collet fixed Wheels. Most parts stamped ARKIRECTO. *¹ for Collet. *²*³ 3.25; 2.6 also reported.

The MCS document for this system is shown below. It can also be downloaded to your computer if desired here

NOTE : If the MCS document does not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided

Pages from the 'Other Systems Newsletter' which contain information on this system are shown below. They can also be downloaded to your computer if desired here

NOTE : If the 'Other Systems Newsletter' pages for ARKIRECTO do not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided

Below there are manuals/leafets which can be downloaded by clicking on the appropriate image.

An Arkirecto instruction manual.