Mekanik(3)

Select System Type Select Country System Text Search
(1207 systems found)

Mekanik(3) Construction Sets

Mekanik(3) was a simple Meccano-like construction system. It was made in Venezuela in the late 1980s.

Manufacturer / Distributor

Juguetin S.R.L., Venezuela

Info from the Metal Constructional Systems Database for MEKANIK [3] (Ref:MEK3)

Maker

System Type
Hole pitch <12.7mm

Country
Venezuela

Dates
known in 1987

Material
Steel

Thread

Boss Type
push fit

Boss Thread

Diametrical Pitch of Gears
--

No. of Parts in System
24

Hole Pitch (Spacing) (mm)
10.0

Diameter of holes in Strips(mm)
4.7

Diameter of the Bore in Bosses(mm)
3.3

Diameter of Axle Rods(mm)

Types of Nuts and Bolts
Nuts: square
Bolts: cheese (slotted)

Material/Finish of Nuts and Bolts

Size of the Nuts across Flats (mm)
`

Bolt diameter (mm)

Comments
Lid not seen; manual cover is B&W with name above & diagonally through drawing of various parts. Main parts: Strips 2-25h, Flanged Plates 5x5 & 5x10h, Brackets. Slight MERKUR look to some parts, models.

The MCS document for this system is shown below. It can also be downloaded to your computer if desired here

NOTE : If the MCS document does not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided

Pages from the 'Other Systems Newsletter' which contain information on this system are shown below. They can also be downloaded to your computer if desired here

NOTE : If the 'Other Systems Newsletter' pages for MEKANIK [3] do not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided

There are currently no manuals, leaflets or photos etc. available for downloading. If you can supply any, please get in contact with me.