'Other' Constructional and Allied Systems Info & Downloads

Select System Type      Select Country      System Text Search
(1207 systems found)

Stanlo

Stanlo was a simple constructional system similar to, but much more elaborate than Dinky Builder. It was made in the USA from 1933 to 1948.

Manufacturer / Distributor

The Stanley Works, New Britain, Connecticut, USA

Info from the Metal Constructional Systems Database for STANLO (Ref:SLO)

Maker
 
System Type
as DINKY BUILDER
Country
USA
Dates
1933 to 1948
Material
Steel
Thread
----
Boss Type
single-tapped
Boss Thread
6-32
Diametrical Pitch of Gears
--
No. of Parts in System
35
Hole Pitch (Spacing) (mm)
---
Diameter of holes in Strips(mm)
3.1 (see comment *1)
Diameter of the Bore in Bosses(mm)
3.1
Diameter of Axle Rods(mm)
3.0
Types of Nuts and Bolts
Nuts: --
Bolts: --
Material/Finish of Nuts and Bolts
--  --
Size of the Nuts across Flats (mm)
---
Bolt diameter (mm)
---

Comments
Much more elaborate than DINKY BUILDER with larger parts. *1 Only in centre of 'braced' Plates.

The MCS document for this system is shown below. It can also be downloaded to your computer if desired here

NOTE : If the MCS document does not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided

Pages from the 'Other Systems Newsletter' which contain information on this system are shown below. They can also be downloaded to your computer if desired here

NOTE : If the 'Other Systems Newsletter' pages for STANLO do not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided

Below there are various manuals/leafets which can be downloaded by clicking on the appropriate image.


A Stanlo manual dated 1933
Added 14/01/20

A Stanlo manual dated 1936
Added 14/01/20

Page content last updated - 14th January 2020