Vulcano

Select System Type Select Country System Text Search
(1207 systems found)

Vulcano

Vulcano was a Meccano-like constructional system. It was made in Italy from around the 1930s to the 1950s

Manufacturer / Distributor

An unknown company from Italy

Info from the Metal Constructional Systems Database for VULCANO (Ref:VUL)

Maker

System Type
Very like Meccano

Country
Italy

Dates
1930s (some significant doubt) to 1950s

Material

Thread

Boss Type

Boss Thread

Diametrical Pitch of Gears

No. of Parts in System
27 (see comment *¹)

Hole Pitch (Spacing) (mm)
12.7

Diameter of holes in Strips(mm)
4.0 (some significant doubt)

Diameter of the Bore in Bosses(mm)

Diameter of Axle Rods(mm)

Types of Nuts and Bolts
Nuts: hexagonal
Bolts: cheese (slotted)

Material/Finish of Nuts and Bolts

Size of the Nuts across Flats (mm)
`

Bolt diameter (mm)

Comments
*¹ In Set 2. Part Nos. go up to 127 so there may be many more parts. The only unusual part shown in MCS is a 5x3 Flanged Plate flanged on its long sides.

The MCS document for this system is shown below. It can also be downloaded to your computer if desired here

NOTE : If the MCS document does not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided

Pages from the 'Other Systems Newsletter' which contain information on this system are shown below. They can also be downloaded to your computer if desired here

NOTE : If the 'Other Systems Newsletter' pages for VULCANO do not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided

Below there are various manuals/leafets which can be downloaded by clicking on the appropriate image.

A Vulcano manual
Added 14/01/20